A. Please follow the below instructions.
1. Hold down FUNCTION button whilst pressing and releasing the MIXER button.
2. Use the UP or DOWN cursor keys to place the square brackets around 'Chorus/DSP'.
3. Press the + key so that this option says DSP.
4. Use the UP or DOWN cursor keys to place the square brackets around the option that currently says ‘DSP[001 Comp 1]’.
5. Press the + key until the display says ‘DSP[004 Enhance].
6. Use the DOWN cursor key to select ‘DSP Edit’ from the menu and press the ENTER key.
7. Use the DOWN cursor key to select ‘Low Phase’
8. Use the + or – key to input the desired amount of low eq.
9. Press EXIT.
10. Press YES twice to save the DSP and exit to main screen.
11. Press the MIXER button.
12. Press the RIGHT or LEFT cursor keys until PART: EXT (M/I) is displayed.
13. Press the DOWN cursor key to select DSP Line and use the plus or minus keys to switch this to ON.
14. Press EXIT or MIXER to return to main screen. The effect should now be applied to the Microphone.
If the sound needs further adjustment, repeat steps 1-10 to alter the DSP settings, making sure that the DSP used in step 5 is now DSP[101 USERNAME] (where username is the name given to the DSP you created and saved in step 10).